資料介紹
The MAX1183 is a 3V, dual 10-bit analog-to-digital converter
(ADC) featuring fully differential wideband trackand-
hold (T/H) inputs, driving two pipelined, nine-stage
ADCs. The MAX1183 is optimized for low-power, high
dynamic performance applications in imaging, instrumentation,
and digital communication applications. This ADC
operates from a single 2.7V to 3.6V supply, consuming
only 120mW while delivering a typical signal-to-noise ratio
(SNR) of 59.6dB at an input frequency of 20MHz and a
sampling rate of 40Msps. The T/H driven input stages
incorporate 400MHz (-3dB) input amplifiers. The converters
may also be operated with single-ended inputs. In
addition to low operating power, the MAX1183 features a
2.8mA sleep mode as well as a 1μA power-down mode to
conserve power during idle periods.
An internal 2.048V precision bandgap reference sets
the full-scale range of the ADC. A flexible reference
structure allows the use of this internal or an externally
derived reference, if desired for applications requiring
increased accuracy or a different input voltage range.
The MAX1183 features parallel, CMOS-compatible
three-state outputs. The digital output format can be set
to two’s complement or straight offset binary through a
single control pin. The device provides for a separate
output power supply of 1.7V to 3.6V for flexible interfacing.
The MAX1183 is available in a 7mm ? 7mm, 48-pin
TQFP package, and is specified for the extended
industrial (-40°C to +85°C) temperature range.
Pin-compatible lower and higher speed versions of the
MAX1183 are also available. See Table 2 at end of data
sheet for a list of pin-compatible versions. Refer to the
MAX1180 data sheet for 105Msps, the MAX1181 data
sheet for 80Msps, the MAX1182 data sheet for 65Msps,
and the MAX1184 data sheet for 20Msps. In addition to
these speed grades, this family includes a multiplexed
output version, for which digital data is presented timeinterleaved
and on a single, parallel 10-bit output port.
Applications
High-Resolution Imaging
I/Q Channel Digitization
Multichannel IF Sampling
Instrumentation
Video Application
Ultrasound
(ADC) featuring fully differential wideband trackand-
hold (T/H) inputs, driving two pipelined, nine-stage
ADCs. The MAX1183 is optimized for low-power, high
dynamic performance applications in imaging, instrumentation,
and digital communication applications. This ADC
operates from a single 2.7V to 3.6V supply, consuming
only 120mW while delivering a typical signal-to-noise ratio
(SNR) of 59.6dB at an input frequency of 20MHz and a
sampling rate of 40Msps. The T/H driven input stages
incorporate 400MHz (-3dB) input amplifiers. The converters
may also be operated with single-ended inputs. In
addition to low operating power, the MAX1183 features a
2.8mA sleep mode as well as a 1μA power-down mode to
conserve power during idle periods.
An internal 2.048V precision bandgap reference sets
the full-scale range of the ADC. A flexible reference
structure allows the use of this internal or an externally
derived reference, if desired for applications requiring
increased accuracy or a different input voltage range.
The MAX1183 features parallel, CMOS-compatible
three-state outputs. The digital output format can be set
to two’s complement or straight offset binary through a
single control pin. The device provides for a separate
output power supply of 1.7V to 3.6V for flexible interfacing.
The MAX1183 is available in a 7mm ? 7mm, 48-pin
TQFP package, and is specified for the extended
industrial (-40°C to +85°C) temperature range.
Pin-compatible lower and higher speed versions of the
MAX1183 are also available. See Table 2 at end of data
sheet for a list of pin-compatible versions. Refer to the
MAX1180 data sheet for 105Msps, the MAX1181 data
sheet for 80Msps, the MAX1182 data sheet for 65Msps,
and the MAX1184 data sheet for 20Msps. In addition to
these speed grades, this family includes a multiplexed
output version, for which digital data is presented timeinterleaved
and on a single, parallel 10-bit output port.
Applications
High-Resolution Imaging
I/Q Channel Digitization
Multichannel IF Sampling
Instrumentation
Video Application
Ultrasound
下載該資料的人也在下載
下載該資料的人還在閱讀
更多 >
- MAX9526,pdf datasheet (Low-Pow
- MAX1180 pdf datasheet (Low-Pow
- MAX1181 pdf datasheet (Low-Pow
- MAX1182 pdf datasheet (Low-Pow
- MAX1184 pdf datasheet (Low-Pow
- MAX1185 pdf datasheet (Low-Pow
- MAX1190 pdf datasheet (Low-Pow
- MAX1195 pdf datasheet (Low-Pow
- MAX1196 pdf datasheet (Low-Pow
- MAX1197 pdf datasheet (Low-Pow
- MAX2141 pdf datasheet (Low-Pow
- DAC6311 pdf datasheet (Low-Pow
- DAC6311 pdf datasheet (Low-Pow
- DAC6311 pdf datasheet (Low-Pow
- DAC7311 pdf datasheet (Low-Pow
- 低代碼(Low-Code)是什么?低代碼的特點有哪些? 3962次閱讀
- 配合MAX9217/MAX9218/MAX9247/MAX9248/MAX9250評估板工作 2642次閱讀
- 分享一個快速閱讀datasheet的方法 2726次閱讀
- SLVS是什么 SLVS走線對信號完整性的影響 1953次閱讀
- POW挖空塊的原理及解決辦法 1211次閱讀
- 如何閱讀Datasheet,是作為電子工程師的必備技能! 8050次閱讀
- PowerInt SID1183K單路1700V IGBT和MOSFET驅動方案 6021次閱讀
- AD9如何簡單快速的制作出原理圖符號 7625次閱讀
- STM32程序之MAX6675熱電偶溫度讀取 1.1w次閱讀
- max3485與max485區別詳解(解析為什么max3485不能代替max485) 10.2w次閱讀
- MAX232引腳圖功能應用電路 MAX232中文資料PDF數據手冊下載 1.5w次閱讀
- MAX706s_MAX706SESA_MAX706TESA_MAX706PA中文資料PDF英文Datasheet數據手冊 5269次閱讀
- MAX8873,MAX8874低壓差、120mA線性穩壓器數據資料 1448次閱讀
- MAX14576,MAX14636,MAX14637 USB充電器檢測器 1812次閱讀
- MAX5970應用電路 2814次閱讀
下載排行
本周
- 1常用電子元器件集錦
- 1.72 MB | 24490次下載 | 免費
- 2PC2456高壓浪涌抑制器控制器數據手冊
- 3.03 MB | 12次下載 | 免費
- 3PC2466高電壓浪涌抑制器數據手冊
- 3.37 MB | 8次下載 | 免費
- 4ssd1306單片 CMOS OLED/PLED 驅動芯片中文手冊
- 1.66 MB | 5次下載 | 1 積分
- 5PC2596 40V 輸入 150KHz 3A 降壓型電源轉換器數據手冊
- 2.44 MB | 3次下載 | 免費
- 6臺式主板DDR5內存插槽引腳功能表資料
- 0.17 MB | 2次下載 | 5 積分
- 7電子元件FVT-6S電壓控制溫補晶體振蕩器(VCTCXO):2.0×1.6mm封裝規格及應用參數詳解
- 437.99 KB | 2次下載 | 免費
- 8ZYNALOG徴格半導體|ZGAD125S14技術參數書
- 982.53 KB | 2次下載 | 免費
本月
- 1常用電子元器件集錦
- 1.72 MB | 24490次下載 | 免費
- 2三相逆變主電路的原理圖和PCB資料合集免費下載
- 27.35 MB | 111次下載 | 1 積分
- 3運算放大器基本電路中文資料
- 1.30 MB | 16次下載 | 免費
- 4蘋果iphone 11電路原理圖
- 4.98 MB | 12次下載 | 5 積分
- 5常用電子元器件介紹
- 3.21 MB | 12次下載 | 免費
- 6PC2456高壓浪涌抑制器控制器數據手冊
- 3.03 MB | 12次下載 | 免費
- 7PC2557正向高壓理想二極管控制電路中文手冊
- 1.80 MB | 8次下載 | 免費
- 8PC2559帶反向輸入保掮 理想二極管控制電路中文手冊
- 1.08 MB | 8次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935130次下載 | 10 積分
- 2開源硬件-PMP21529.1-4 開關降壓/升壓雙向直流/直流轉換器 PCB layout 設計
- 1.48MB | 420064次下載 | 10 積分
- 3Altium DXP2002下載入口
- 未知 | 233089次下載 | 10 積分
- 4電路仿真軟件multisim 10.0免費下載
- 340992 | 191390次下載 | 10 積分
- 5十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183345次下載 | 10 積分
- 6labview8.5下載
- 未知 | 81591次下載 | 10 積分
- 7Keil工具MDK-Arm免費下載
- 0.02 MB | 73816次下載 | 10 積分
- 8LabVIEW 8.6下載
- 未知 | 65990次下載 | 10 積分
評論