資料介紹
Motorola reserves the right to make changes without further notice to any products here-
in. Motorola makes no warranty, representation or guarantee regarding the suitability of
its products for any particular purpose, nor does Motorola assume any liability arising out
of the application or use of any product or circuit, and speci?cally disclaims any and all
liability, including without limitation consequential or incidental damages. “Typical” pa-
rameters can and do vary in different applications. All operating parameters, including
“Typicals” must be validated for each customer application by customer’s technical ex-
perts. Motorola does not convey any license under its patent rights nor the rights of oth-
ers. Motorola products are not designed, intended, or authorized for use as components
in systems intended for surgical implant into the body, or other applications intended to
support or sustain life, or for any other application in which the failure of the Motorola
product could create a situation where personal injury or death may occur. Should Buyer
purchase or use Motorola products for any such unintended or unauthorized application,
Buyer shall indemnify and hold Motorola and its of?cers, employees, subsidiaries, af?li-
ates, and distributors harmless against all claims, costs, damages, and expenses, and
reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury
or death associated with such unintended or unauthorized use, even if such claim alleges
that Motorola was negligent regarding the design or manufacture of the part. Motorola
and? are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportuni-
ty/Af?rmative Action Employer.
in. Motorola makes no warranty, representation or guarantee regarding the suitability of
its products for any particular purpose, nor does Motorola assume any liability arising out
of the application or use of any product or circuit, and speci?cally disclaims any and all
liability, including without limitation consequential or incidental damages. “Typical” pa-
rameters can and do vary in different applications. All operating parameters, including
“Typicals” must be validated for each customer application by customer’s technical ex-
perts. Motorola does not convey any license under its patent rights nor the rights of oth-
ers. Motorola products are not designed, intended, or authorized for use as components
in systems intended for surgical implant into the body, or other applications intended to
support or sustain life, or for any other application in which the failure of the Motorola
product could create a situation where personal injury or death may occur. Should Buyer
purchase or use Motorola products for any such unintended or unauthorized application,
Buyer shall indemnify and hold Motorola and its of?cers, employees, subsidiaries, af?li-
ates, and distributors harmless against all claims, costs, damages, and expenses, and
reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury
or death associated with such unintended or unauthorized use, even if such claim alleges
that Motorola was negligent regarding the design or manufacture of the part. Motorola
and? are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportuni-
ty/Af?rmative Action Employer.
下載該資料的人也在下載
下載該資料的人還在閱讀
更多 >
- UG-1549:評估ADuM7703 16位隔離Sigma-Delta ADC
- UG-690:評估AD7405 16位隔離式Sigma-Delta ADC
- AD7721:CMOS 16位,468.75 kHz,Sigma-Delta ADC數據Sheet
- AD7791:低功率,Bufferd 24位Sigma-Delta ADC數據Sheet
- UG-761:AD7714-3 24位低功耗Sigma-Delta ADC評估板
- UG-1525:評估ADuM7701 16位隔離Sigma-Delta ADC
- AN-365:AD7712 24位Sigma-Delta A/D轉換器評估板
- AD1555/AD1556:24位Sigma-Delta ADC數據表
- UG-1871:評估ADuM7704 16位隔離Sigma-Delta調制器
- ADUM7704: 16-Bit, Isolated, Sigma-Delta Modulator Data Sheet
- UG-1871: Evaluating the ADuM7704 16-Bit, Isolated, Sigma-Delta Modulator
- 基于Simple Sigma-Delta ADC in FPGA模擬到數字轉換的參考設計
- SD設計工具Sigma-Delta ADC調制器的介紹 5次下載
- 基于89C2051的Sigma-Delta ADC變化實現 79次下載
- Principles of Sigma-Delta Modu
- 通過Delta DFU技術推進物聯網OTA更新 261次閱讀
- 關于NS SAR ADC的paper結構介紹 1867次閱讀
- 芯海CS1256|帶人體阻抗測量模塊BIM功能和24位ADC的AFE 2090次閱讀
- 簡儀動態信號數據采集模塊方案 876次閱讀
- Ti.ADS1115-15Bit差分ADC 1.5w次閱讀
- 具有擴展范圍的電容數字轉換器 1200次閱讀
- 常用的幾種ADC類型的特點 8449次閱讀
- Delta繞線電機的內部結構介紹 5886次閱讀
- 18位Sigma-Delta ADC ZSSC1856的特性優勢及與應用電路分析 3140次閱讀
- 一文解讀什么是Sigma-Delta ADC? 8.7w次閱讀
- 新唐科技音頻轉換器簡介 1283次閱讀
- Delta-Sigma小數鎖相環的邏輯及特性 8040次閱讀
- Holtek推出Flash MCU BH66F5242可廣泛適用于測量類產品 3905次閱讀
- PC控制系統和驅動技術用于測試單元中的Delta機器人設計 1576次閱讀
- 賽靈思FPGA設計技巧與應用創新(二) 1353次閱讀
下載排行
本周
- 1DC電源插座圖紙
- 0.67 MB | 2次下載 | 免費
- 2AN158 GD32VW553 Wi-Fi開發指南
- 1.51MB | 2次下載 | 免費
- 3AN148 GD32VW553射頻硬件開發指南
- 2.07MB | 1次下載 | 免費
- 4AN111-LTC3219用戶指南
- 84.32KB | 次下載 | 免費
- 5AN153-用于電源系統管理的Linduino
- 1.38MB | 次下載 | 免費
- 6AN-283: Σ-Δ型ADC和DAC[中文版]
- 677.86KB | 次下載 | 免費
- 7SM2018E 支持可控硅調光線性恒流控制芯片
- 402.24 KB | 次下載 | 免費
- 8AN-1308: 電流檢測放大器共模階躍響應
- 545.42KB | 次下載 | 免費
本月
- 1ADI高性能電源管理解決方案
- 2.43 MB | 450次下載 | 免費
- 2免費開源CC3D飛控資料(電路圖&PCB源文件、BOM、
- 5.67 MB | 138次下載 | 1 積分
- 3基于STM32單片機智能手環心率計步器體溫顯示設計
- 0.10 MB | 130次下載 | 免費
- 4使用單片機實現七人表決器的程序和仿真資料免費下載
- 2.96 MB | 44次下載 | 免費
- 53314A函數發生器維修手冊
- 16.30 MB | 31次下載 | 免費
- 6美的電磁爐維修手冊大全
- 1.56 MB | 24次下載 | 5 積分
- 7如何正確測試電源的紋波
- 0.36 MB | 17次下載 | 免費
- 8感應筆電路圖
- 0.06 MB | 10次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935121次下載 | 10 積分
- 2開源硬件-PMP21529.1-4 開關降壓/升壓雙向直流/直流轉換器 PCB layout 設計
- 1.48MB | 420062次下載 | 10 積分
- 3Altium DXP2002下載入口
- 未知 | 233088次下載 | 10 積分
- 4電路仿真軟件multisim 10.0免費下載
- 340992 | 191367次下載 | 10 積分
- 5十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183335次下載 | 10 積分
- 6labview8.5下載
- 未知 | 81581次下載 | 10 積分
- 7Keil工具M(jìn)DK-Arm免費下載
- 0.02 MB | 73810次下載 | 10 積分
- 8LabVIEW 8.6下載
- 未知 | 65988次下載 | 10 積分
評論