2.一般說明
LT8711UXE2是一款高性能的Type-C/DP1.4到HDMI2.0轉換器，設計用于將USBType-C源或DP1.4源連接到HDMI2.0收發器。該LT8711UXE2集成了一個符合DP1.4標準的接收器和一個符合HDMI2.0標準的發射器。此外，還包括用于CC通信的兩個CC控制器，以實現DP Alt模式和功率傳遞功能，一個用于上游Type-C端口，另一個用于下游端口。
DP接口包括4個主通道、輔助通道和HPD信號。接收器支持最大的還提供數字音頻輸出接口:12S和SPDIF。從DP數據流中提取并恢復音頻流，然后路由到數字音頻輸出或HDMI輸出。該設備支持8通道LPCM或壓縮音頻在最大192kHz采樣率。該設備能夠自動操作，該操作由集成微處理器啟用，該微處理器使用嵌入式SPI閃存存儲固件。系統控制也可通過使用專用配置12C從站接口。
3.應用程序
●對接站
加密狗

2. General DescriptionThe LT8711UXE2 is a high performance Type-C/DP1.4 toHDMI2.0 converter, designed to connect a USB Type-Csource or a DP1.4 source to an HDMI2.0 sink. TheLT8711UXE2 integrates a DP1.4 compliant receiver, andan HDMI2.0 compliant transmitter. Also, two CCcontrollers are included for CC communication toimplement DP Alt Mode and power delivery function, onefor upstream Type-C port and another for downstreamport.The DP interface comprises 4 main lanes, tell 18171547226,AUX channel,and HPD signal. The receiver supports maximumalso provides digital audio output interfaces: I2S andSPDIF. The audio stream is extracted and recovered fromDP data stream, and then routed to digital audio outputsor HDMI output. The device supports 8-channel LPCM orcompressed audio at maximum 192kHz sample rate.The device is capable of automatic operation which isenabled by an integrated microprocessor that uses anembedded SPI flash for firmware storage. System controlis also available through the use of a dedicatedconfiguration I2C slave interface.
3. Applications

Docking station

Dongle

*附件：Lontium-LT8711UXE2.pdf